Short answer
On a coil-top range, a burner that won't heat is often just a loose or failed element — swap it with a same-size element that works to find out. If the swapped element heats in the other spot but not this one, the receptacle or the infinite switch for that burner has failed. On glass-top ranges the element is under the glass, so any repair is technician work. If several burners and the oven stop together, check the breaker first.

Coil tops: the swap test
- Make sure all burners are off and cool.
- Lift the dead element and pull it straight out of its receptacle.
- Plug in a same-size element from a working burner.
- If it heats, replace the original element; if it doesn't, the receptacle or switch is the problem.
Glass and ceramic tops
Radiant elements sit under the glass and are wired to an infinite switch or control board. A zone that won't heat, heats only on high, or glows but stays cool needs a technician. Never use a cracked glass top — spills can reach live parts.

Symptom pattern
| What happens | Likely cause |
|---|---|
| One coil dead, works in another spot | Receptacle or infinite switch |
| Coil dead in any spot | Failed element |
| Burner only works on high | Infinite switch |
| Several burners and oven dead | Tripped half of the 240-volt breaker |
Stop if
Safety
- You see sparking at a receptacle
- The glass top is cracked
- You smell burning plastic from the controls
What to request
A symptom points to likely causes; only testing confirms one. If the checks above don't solve it, request a diagnosis for stove & range repair and mention what you've already checked.
Common questions
Why does one burner on my electric stove not heat?
On coil tops, the element or its receptacle or switch has failed. Swap the element into another spot of the same size to see which.
Can I replace an electric stove coil element myself?
Usually, for plug-in coil elements: with the range off and cool, pull the old one out and plug in an identical replacement. Receptacles and switches are technician work.
Why does my burner only work on high?
The infinite switch that cycles power at lower settings has likely failed. A technician replaces it.
Why did several burners and the oven stop at once?
One half of the range's 240-volt double breaker may have tripped. Switch it fully off, then on.
Why won't a glass-top burner heat up?
The radiant element, its limiter or the switch or control has failed. It's under the glass, so it's a technician repair.
Is a sparking stove burner dangerous?
Yes — turn the burner and breaker off. Sparking at a coil receptacle usually means a burned receptacle or a damaged element.
Why does my coil burner glow unevenly?
A partly failed element can heat unevenly or show a bright spot. Replace it before it fails completely.
Is it worth repairing an electric stove burner?
Almost always for a coil element or switch. A cracked glass top on an older range is the decision point — compare with replacement.
Why does my glass cooktop burner turn on and off?
Radiant elements cycle on and off at lower settings to hold heat. That's normal unless it shuts off completely on high.
How much does it cost to fix an electric burner?
A coil element is inexpensive; switches and receptacles cost more; glass-top elements more again. The provider confirms the price first.
Need stove & range repair? Call now
Pricing, timing, and appointments are confirmed by the repair provider.
Talk to someone now about your appliance. Available 24/7.
RepairHearth is a free referral service. By calling, you agree to be connected with an independent, participating repair provider who may call or text you back about your request at the number you call from. Calls may be recorded for quality and routing. Consent is not a condition of any purchase; you can opt out at any time, and message and data rates may apply. Privacy policy.